Roundsling - Titan 1T to 10T WLLThere are 8 products.

STOCKED Roundslings from 1.0T to 10T Lift with a 7:1 Safety Factor to Standards AS4497

PLEASE NOTE: All Slings are supplied with the "Original" Certification, We stress that you do not discarded as HES NZ does not keep a copy.

Protect the sling from sharp edges by using protective sleeves or corner pieces. Do not pass a sling over sharp corners or edges without adequate protection from abrasion or cutting. Corners with a radius of less than three times the compressed thickness of the sling material are deemed to be sharp. Polyurethane protective covers are recommended when lifting loads of concrete, glass and steel plate. Polyurethane or webbing protective sleeves are recommended when lifting loads of aluminium, panels, machinery, steel pipe or timber.

PLEASE ADD an Identification Tag to your order if you require the sling with Due Date, WLL, ID Number, Company Name etc..

Additional Marking: If additional marking is required on TiTan Lifting Roundslings or Webslings the manufacturer recommends using Oil-Based marking pen which the factory currently use in the factory.